- You do not have any products in your shopping cart yet.
SW-MOTECH builds the aluminum case system to fit with the model-specific PRO side carriers, which are extremely durable.
TEST WINNER in the magazine MOTORRAD issue 05/2020. Test rating: VERY GOOD
The robust TRAX ADV aluminum cases feel at home on any route: Design embossing supports the stability of the 1.5-millimeter thick, welded aluminum wall material. A completely removable lid with handles made of anodized aluminum and quick-release fasteners makes loading and unloading the motorcycle cases easier, and the beveled side edge provides high ground clearance when cornering. With this complete solution, you have all the necessary components to go on a big trip with TRAX right away: Two waterproof TRAX ADV side cases, two removable SW-MOTECH side carriers, adapter kit, lock set, opening limiter, and anti-theft protection at an attractive total price. The model-specific carriers and the size of the cases are perfectly matched to the rear geometry and exhaust system of the motorcycle.
A motorcycle case without compromises: In the development of the TRAX ADV, stability and tightness against dust and water were just as much a focus as easy handling. Whether it's an off-road adventure, a long-distance tour, or a short trip, the premium aluminum cases with a wall thickness of 1.5 millimeters impress in every challenge.
Details
- Color: black
- Total weight: approx. 19.5 kg
- Total volume: 74.0 l
- Extremely durable due to optimized shape and 2.5 mm thick steel
- Perfect fit, constructed close to the vehicle
- Completely removable with newly developed, even more robust quick-release fasteners
- Optional theft protection available
- For permanent installation, quick-release fasteners can be replaced with standard parts (M8)
- Numerous functional holes
- Easy installation at original mounting points
- Effective corrosion protection through powder coating
- Secure hold for TRAX, AERO, and SysBag WP L with adapter plate
Details
- Material: Steel
- Surface: powder-coated
- Color: black
- Total weight: approx. 5.2 kg
- Width mounted on motorcycle: 44.0 cm
Note
- Specific adapter kits are necessary for mounting side cases on the PRO side carrier. These are available separately for SW-MOTECH cases of the TRAX ADV, TRAX ION, and AERO ABS series as well as SysBag WP L with adapter plate. Adapter kits are also available separately for luggage systems from other manufacturers.
- Adapter kit for attaching TRAX or NANUK side cases to SW-MOTECH PRO side carriers
- For mounting on the existing holes of the SW-MOTECH PRO side carrier
- For left and right
Details
- Color: silver
- Total weight: approx. 0.3 kg
- Model for the left side of the motorcycle
- Protection against oxidation and abrasion through black powder coating, easy-to-clean surface
- Robust and waterproof side case made of aluminum
- Beveled side edge for high ground clearance when cornering, additional protection through corners made of fiberglass-reinforced plastic
- Robot-assisted welding and punch riveting prevent moisture penetration
- Completely removable lid with quick-release fastener even when loaded
- 4 large lashing points integrated into the lid design (e.g., for tent or additional bag)
- High stability through design embossing, welded edges, and pre-installed holding rail
- Hinges made of stainless steel, carrying handles made of anodized aluminum
- Opening limiters provide additional stability when using additional luggage on the lid
- Replaceable lid seal
- Membrane allows easy opening of the lid even with strong pressure and temperature fluctuations
- Quick mounting on all PRO and EVO carriers (adapter available separately)
- Adapter kits for mounting on carriers from other manufacturers like Givi and Hepco & Becker also available
- Lock set with 6 locks with the same key is optionally available and not included
Details
- Material: Aluminum
- Surface: powder-coated
- Color: black
- Dimensions: 49.0 x 23.0 x 37.0 cm
- Total weight: approx. 5.1 kg
- Total volume: 37.0 l
Note
- Also available as TRAX ADV aluminum case system with 2 side cases, model-specific side carriers, adapters, and lock set.
Required for installation
- Side carrier, adapter kit, TRAX lock set
- Model for the right side of the motorcycle
- Protection against oxidation and abrasion through black powder coating, easy-to-clean surface
- Robust and waterproof side case made of aluminum
- Beveled side edge for high ground clearance when cornering, additional protection through corners made of fiberglass-reinforced plastic
- Robot-assisted welding and punch riveting prevent moisture penetration
- Completely removable lid with quick release even when loaded
- 4 large lashing points integrated into the lid design (e.g., for tent or additional bag)
- High stability through design embossing, welded edges, and pre-installed holding rail
- Hinges made of stainless steel, carrying handles made of anodized aluminum,
- Opening limiters provide additional stability when using additional luggage on the lid
- Replaceable lid seal
- Membrane allows easy opening of the lid even with strong pressure and temperature fluctuations
- Quick mounting on all PRO and EVO carriers (adapter available separately)
- Adapter kits for mounting on carriers from other manufacturers like Givi and Hepco & Becker also available
- Lock set with 6 locks that use the same key is optionally available and not included
Details
- Material: Aluminum
- Surface: powder-coated
- Color: black
- Dimensions: 49.0 x 23.0 x 37.0 cm
- Total weight: approx. 5.1 kg
- Total volume: 37.0 l
Note
- Also available as TRAX ADV aluminum case system with 2 side cases, model-specific side carriers, adapters, and lock set.
Required for mounting
- Side carrier, adapter kit, TRAX lock set
- 9 keyed-alike locks
- With anti-theft protection for PRO side carriers
- Compatible with side cases and top cases of the TRAX ADV and TRAX ION series
- One key for all locks
Details
- Color: black
- Total weight: approx. 0.5 kg
- Multitool as a practical keychain
- Quick-release opener for EVO and PRO side carriers
- Hex key (14 mm) - ideal for many motorcycle mirrors
- Hex key in four additional sizes (8, 10, 12, 13 mm)
- Bottle opener
- Keychain loop
- With laser-etched SW-MOTECH logo
Details
- Material: Stainless steel
- Surface: brushed
- Color: silver
- Total weight: approx. 0.0 kg
Find more products here
SW-MOTECH Size Chart
SW-MOTECH tank bags are selected by outer dimensions, volume and motorcycle/tank-ring compatibility.
PRO tank bags
| Model | Dimensions | Weight | Volume |
|---|---|---|---|
| PRO Micro | 27 × 20.5 × 11 cm | 0.8 kg | 3–5 L |
| PRO Engage | 35 × 26.5 × 20 cm | 1.1 kg | 7–10 L |
| PRO Sport | 39.5 × 31.5 × 16.5 cm | 1.4 kg | 12–17 L |
| PRO Trial | 37 × 31 × 24 cm | 1.6 kg | 13–18 L |
PRO tank bags require the matching PRO tank ring. Always verify motorcycle compatibility with the SW-MOTECH vehicle filter.
Sources: Offizielle SW-MOTECH PRO Tankrucksack Produktseiten. Research checked on 20 August 2026.